Before and after photos and a short report for your files, on every job.
Mile High Blasters logo Mile High Blasters

Home/Kitchens/Fryers

Fryers and the fryer wall

The fryer wall, cleaned dry.

Fryer grease does not stay in the fryer. It hangs in the air, lands on everything near it, and cooks on. Dry ice blasting takes it off the outside of the fryer, the wall behind it, the sides and the floor edge. No water and no degreaser.

What builds up

Every basket drop leaves a little on the wall.

Hot oil throws off a fine mist. It lands on the fryer body, the wall behind it, the sides of the next unit, the casters and the floor edge. The heat bakes it on, night after night.

After a while it is not grease anymore. It is a hard, sticky brown coat. A rag just slides over it.

Why water and degreaser struggle

The degreaser has to soak

Baked-on fryer grease needs a strong degreaser and time to soak. Then all of it has to be rinsed off.

The water runs behind

Rinse water runs behind and under the fryer, to the gas line, the casters and the floor seam. It is hard to dry back there.

Water and oil do not mix

Nobody wants water near a fryer full of oil. So the wall behind it often just does not get done.

What dry ice does

The grease freezes, cracks and falls off.

Dry ice is frozen CO₂, in pellets the size of rice. We fire it at the grease with compressed air. The grease gets cold and brittle and lets go. The pellet turns into gas. What is left on the floor is the grease that came off, and we take it with us.

skilletFryer outsides & sides
grid_onThe wall behind the fryer
kitchenSplash guards & cabinets
trolleyCasters & the floor edge

What we do not do

Inside the hood and the duct. Cleaning inside the hood and the duct is its own trade, with its own rules. We do not do that part. We clean the outside of the hood and the stainless around it.

The oil. Draining the fryer and changing the oil stay with your crew. The fryer is off and cool before we start.

Power we cannot shut off. If something electrical cannot be shut off or covered, tell us. It is your call whether we clean near it, and we ask before we start.

Air moving. The pellets turn into CO₂ gas, so the kitchen needs air moving while we work. We tell you at the quote which doors to open.

How a night goes

You close. We come in. We clean.

01

After close

We come in when your crew goes home. The fryer is off and cool.

02

Cover, then clean

We cover what is near the work. Then the grease comes off the fryer, the wall and the floor edge.

03

Dry when we stop

No hose, no bucket, no mop. What comes off, we take with us. Your crew still does its normal wipe-down before prep.

04

Photos for your files

You get before and after photos and a short report: what came off, and what we could not reach.

Questions

Straight answers

Can you clean a fryer with dry ice?

Yes, the outside of it and what is around it: the fryer body, the sides, the splash guards, the wall behind it, the casters and the floor edge. The fryer is off and cool before we start. Draining and changing the oil stay with your crew.

Does dry ice put water near the oil?

No. Dry ice is frozen CO₂. It turns into gas when it hits, so no water goes on the fryer, the wall or the floor.

Do you clean inside the hood above the fryer?

No. Cleaning inside the hood and the duct is its own trade. We clean the outside of the hood and the stainless around it.

How much does it cost?

Every kitchen is different, so we do not post prices. Send us a photo of it and we give you a fixed price in writing before we start.

More in the kitchen

The rest of the line

Something else near the fryer? Send us a photo and we will tell you if it is a dry ice job.

Send us a photo of the fryer wall.

We give you a fixed price in writing before we start.

Get a free quote Text (720) 773-2032
Text Message Free quote